Latest Entries »

Uses and Best Fit for Under 14kW Generators

Uses and greatest Fit for less than 14kW Generators

Generators that leave less than 14kW of power might appear to be lightweights, but a majority of them can supply power throughout an outage to help keep critical circuits operating and supply a couple of conveniences at the same time. Standby generators followed by an automated transfer switch operate automatically throughout an outage to keep your home furnished with power, if you are not home. Portable generators won’t operate automatically, nevertheless they can get the job done when a standby generator just isn’t an option.

Fuel Consumption

Supplying fuel for a generator throughout an outage is always very important. Finding gasoline or diesel fuel within a widespread outage may be difficult or supplies might be restricted. After Hurricane Sandy, some areas rationed gasoline. Smaller generators use less fuel, and consumption is directly affected by electrical load.

Standby generators use propane or natural gas and eliminate the need for continuous refueling. Some portables can work on propane, and some are able to use propane, propane, or gasoline.

Homes that use LP gas as an alternative to gas must store their fuel inside a tank. LP-powered generators from 7kW to 14kW in many cases are well suited for LP gas installations simply because they use less fuel than larger generators. Expect a fully loaded 7kW generator to utilize about 1.3 gallons of propane each hour, while 20kW could use approximately 2 gallons hourly to create the equal amount of power.

Homes with Lower Power Requirements

Not every home requires how much power a sizable generator is capable of producing. Many older homes have 100-amp as well as 60-amp main service panels, and all the power they are able to usage is already limited. Even newer homes with 200-amp electrical service avoid much power.

A 13kW generator can establish 54 amps of current continuously at 240 volts―almost over a 60-amp service, and except for peak periods, it nears the maximum amount power supplied through a 100-amp service in several situations. A more substantial generator is actually unnecessary.

When air conditioning and other high-voltage, high-current appliances are used, a transfer switch that manages generator power will make sure that power hungry appliances have the power they require.

Mobile Homes

Many mobile homes are designed and developed for 50 to 60-amp service and therefore are supplied through an external disconnect mounted on a pole or post outside the camper, combined with the utility company meter. Building codes typically have to have a 100-amp service as the minimum, and also the cabling that runs between the disconnect and also the camper must accommodate a whole lot of power. Other jurisdictions allow connection through a 60-amp cord and receptacle.

Either way, the energy needs of mobile homes are normally lower than built-in-place homes, and are good candidates for just 14kW portable or standby generators that are powered by LP gas, propane, or gasoline. Gasoline storage is often a condition in mobile home communities, making LP or gas preferable.

Renewable Energy Systems

Energy powered off-the-grid energy systems provide their unique power which gets held in batteries. They supply enough power for energy-efficient appliances , nor depend on power in the electric utility. In most cases, these are fully disconnected from the power grid.

Generators made to operate off grid and work on LP gas fill out the space when the sun doesn’t shine or perhaps the wind doesn’t blow, and battery levels run low. Typically, these generators produce about 6kW, although larger units are available. Off grid and renewable energy systems are equipped for minimal power use and ecologically friendly operation, making small, cost effective generators the ideal choice.

To find out more go to: www.GeneratorPowerForLess.com

Understanding the term Home Standby Generators

Understanding the term Home Standby Generators

Residential use generators supply power to homes when the electric utility supply is lost. Utility power interruptions occur due to weather related events including high winds, ice buildup on wires, wild animal damage, car accidents, and damage caused by many other acts of nature or man. Appliances for the home and systems that count on electrical power cannot function during an outage unless a method of getting emergency power is available.

Permanent Installation

Standby generators are always ready to operate, twenty-four hours a day, seven days every week. These are permanently wired on the home’s electrical system through an automatic transfer switch, and attached to the home’s natural or LP gas supply pipes. A Natural or LP gas hookup ensures the generator has always a satisfactory availability of fuel available and won’t require frequent refueling during an extended outage.

Automatic Transfer Switch

Automatic Transfer Switches work with the standby generator’s controller. Following your generator starts and is ready to accept the electrical load, the automated transfer switch disconnects the electrical system from your utility supply and connects it to the home standby generator. The transfer of power from one supply source to another is automatic and controlled by electronic switches within the transfer switch. Once the electric utility restores power, the transfer switch reconnects the utility supply and disconnects the generator.

Automatic transfer switches are generally made by the generator’s manufacturer to meet the requirements of the particular standby unit, because they work directly with all the standby generator’s controller. Additionally, they provide different options, including power management, with respect to the needs with the consumer.

Some transfer switches install between the utility meter along with the main service panel to supply power to your entire panel. Others install as being a subpanel in the main service panel and just supply selected critical circuits, such as pumps, refrigerators, furnaces, and medical equipment.

Operation

Standby generators are automatic, permanently installed equipment that don’t require frequent refueling with liquid fuels. They operate without operator intervention, aside from regular, scheduled maintenance. Unlike portable models which have to be connected and started when power is necessary, the standby home generator operates in a totally automatic mode, whether or not the homeowner is just not present.

Standby power means the generator is ready to operate always. When an outage occurs, the generator starts following a short delay, then the transfer switch moves your house onto emergency backup power. It happens quickly and without intervention, but you can still find a matter of seconds when a home is without electrical power. Some electronics may necessitate an uninterrupted supply that operates off an assortment before the standby generator will be able to start and connect towards the home’s electrical system.

Installation

Installation requires building permits and the help of a qualified electrician to put in the transfer switch to get the necessary electrical connections, in addition to a plumber in order to connect the generator to the home’s gas supply. Inspections of the prepared gravel bed or layer of concrete are generally required before installation, along with the finished work after installation. Adherence to National Electrical Codes, Plumbing Codes, National Fire Protection Association Codes, and local ordinances is required.

The place chosen for installation neesd to make sure that exhaust gases will not likely enter the home and the application of CO detectors is also required.

Home standby generators fill out when electric utility power becomes unavailable to ensure the safety of homes, property, and families.

To find out more, go to: www.BackupHomePower.com

Deciding on Installing Your Home Standby Generator Yourself

Put in a Home Standby Generator Yourself: Why/ Why Not?


Standby generators come together with an automatic transfer switch to supply electricity within a power outage. Installation isn’t necessarily a complex job, but it does require knowledge past the scope of most do-it-yourself books. Handling the work yourself rather than hiring an experienced and qualified installer can save some money, but it will most likely be more difficult. You will find pros and cons to handling it as a DIY project and hiring an expert.

Installation

The best standby generator installation works on the load center along with an automatic transfer switch in a single unit. The transfer switch connects to a double-pole breaker in the primary service panel. The circuits the generator will power are disconnected in the primary panel and routed in to the new automatic transfer switch where they are attached to new breakers.
Other installations replace the main service panel once you get your one that incorporates the automatic transfer switch, or the ATS is installed between the meter as well as the existing panel.
Plumbing to increase the home’s gas lines for the standby generator is essential along with an assessment of the gas utility meter to make sure it will handle the elevated flow of gas. Otherwise, the utility will need a whole new meter installation.

Electrical Work

Should you be knowledgeable enough to do the work yourself and may convince the local building inspector that one could handle the work, you may well be around the installation. Understanding of the country’s Electric Code as it pertains to the installation plus your service entrance, plus a documented plan for installation may help pave the way for a permit to proceed having a generator installation, but you will still have to you must do everything correctly and pass the inspection.
Failure to incorporate important codes or making dangerous mistakes might prompt the inspector to ask you to hire a mason afterwards, which will probably set you back more income in the long run. Creating a “No Occupancy” tag slapped on your home since you made lots of mistakes can send you away and off to a motel and incur more expense before troubles are corrected and your generator passes installation.

Plumbing Work

Linking to your home’s gas or LP gas supply lines is important. Propane lines for the new standby generator are run with black iron pipe, and LP gas uses copper or plastic tubing. You’ll need the skill to generate leak-free connections and then test for leaks after the installation.
Building inspectors are especially shy of house owners that want to do their own gas line plumbing work, and gas utilities feel similarly. The possibility of explosion or suffocation from leaking gas is very high when mistakes occur and gas lines leak. Explosion danger extends to neighboring homes.

When you should Do-It-Yourself

Should you be confident in your abilities and can receive the building permit, then proceed to install your standby generator and automatic transfer switch. Follow all the manufacturer instructions in addition to all local building codes. The dwelling inspector should be other people you know in the installation and can offer advice and caveats. Should you come across conditions that lead you to deviate plan, call the inspector to ensure the modern plan’s acceptable. Most of all, never proceed with purchasing materials or starting the installation before you have the proper permits.

When you should Hire a Pro

Remember that you’re managing electricity and you will be exposed to dangerous electrical currents. You will have to tap into your home’s gas lines and make up a leak-free pipe run and connection to the standby generator. Failure either in of the trades could potentially cause severe injury or death. If you are not positive about your abilities with proven experience, hire a specialist. It’s really worth the peace of mind and saving a few bucks isn’t worth losing the life of someone you care about or yourself.

For more information go to: www.GeneratorPowerForLess.com

Whole House Generators – a look at what really matters

Entire House Generators – a look at what it really means, and how much power you will get

Some standby generator packages are described as providing “entire house power” which suggests they can power everything within your house. The packages almost always have an automatic transfer switch with power management features.

By itself, “entire house power” signifies that the whole property is furnished with power, however not all generators can handle producing enough power to support all appliances and lights at the same time.

Home Power Use

The conventional new house in the United States features a 200-amp service panel with many circuit breakers. If your amperage of all the so-called breakers inside the panel are added up, they could total up to 800 amperes, far well over exactly what the panel or main breaker are equipped for. If every one of the home’s appliances and lights were started up, the total would still not exceed 200 amperes as well as the main breaker wouldn’t trip.

Safety and convenience dictate the size of the main service panel and the amount of circuits it supplies. The dimensions of the main breaker isn’t really a good indicator of the quantity of power the full house uses.

Power Management

Managing power takes two forms. Homeowners do their part by switching off nonessential appliances and lights while operating on standby power. What creates a nonessential appliance depends on the problem and also the capacity for the full house generator. Power management devices such as load-shedding controllers or digital power management systems prevent backup generator overloads by limiting the amount of high-demand appliances that operate as well.

Automatic Transfer Switches

The automated transfer switch is a vital part in the entire house generator system. Their installation configures them because the gatekeeper for electricity for the complete home. During normal operation, they send power in the electric utility to the main service panel. When utility power fails, they disconnect the utility lines in the home and route power in the entire house generator to the main panel.

To meet electrical codes, the automatic transfer switch current rating in a entire house power configuration must equal or exceed the main circuit breaker current rating. A 200-amp main circuit breaker requires a 200-amp or greater automatic transfer switch. By using a smaller switch for entire house power may cause a fire or permanently damage the switch.

Entire House Generators

Generators are rated in watts (W) or kilowatts (kW), a measure of the work electric power is capable of doing. Air-cooled generators for entire house power start with ratings of around 8,000 watts (8 kW) and top out at about 20,000 watts (20 kW). Liquid-cooled generators for residential applications offer 20 kilowatts to 65 kilowatts of electric power.

By comparison, a hundred amp main circuit breaker are equipped for about 24,000 watts of power and a 200 amp panel about 48,000 watts of power. Keep in mind that the home never uses the quantity of power the main breaker is prepared for.

Selecting a Home Standby Generator

For the majority of applications, it is not necessary or economical to set up a complete house generator competent at providing the equal power the main circuit breaker is prepared for. Through the use of power management devices and judicious homeowner power use, smaller generators will provide the full house with electric power.

Perform a power audit to discover the maximum amount of power used at the time. Figure out what high voltage appliances are crucial and which aren’t. Finally, select a backup generator package that will meet the power needs of the entire house and use power management devices to manage the energy supplied to high voltage appliances for efficient entire house power that meets your needs.

For more info go to: www.BackupHomePower.com

Home Power Generation Units and Their Impact

Home Power Generation Units and their impact

It absolutely was just one century ago that electricity was obviously a convenience instead of a necessity. Homes which in fact had electricity enjoyed a number of lights and also fewer receptacles for plugging appliances into. Electrical codes were few and those that existed weren’t widely enforced. Gradually, some great benefits of electricity were realized and by the 1930s, most homes in US cities had electricity, but rural farms and homes didn’t.
The Rural Electrification Act of 1935 was passed with the purpose of providing electricity to any homes in the USA. Multiple electricians worked along with line crews to put in electricity on farms. Most homes were provided 60 amp service that included a range circuit, a kitchen circuit, and two or three lighting circuits.

Reliance upon Electricity

Obviously, luxury hotels and manufacturing facilities were the first to embrace electricity. Hotels installed electric lighting and operated their own generators. Likewise, industry switched from steam driven equipment to electrical motors and in addition used electrical generators to produce their own electricity.
As the ability to produce electricity grew, hotels and industry gradually stopped generating their own power and relied on the newly constructed power grid instead. Electricity use spread along with other businesses and after that homes in cities and across America’s rural areas.
As electrical service was installed through the county, reliance upon electricity grew. Refrigeration that was once based on blocks of ice was largely substituted with electric refrigerators after the 1940s. Electrical lighting proved safer than oil lanterns and gas lamps, and America’s reliance upon electricity grew as each new convenience was a necessity. Virtually all the electricity originated from generators operated by the first electric utilities.

Backup Power

The electricity grid has always been susceptible to interruptions due to natural events and accidents. Weather is often the culprit behind an outage then when damage to the grid is widespread, it could take days or even weeks to fix.
Home standby and portable power generation units can supply electricity when the utility services are interrupted. They are doing more than simply supply power for the sake of convenience, they protect homes, families, and property. Today’s modern home relies on electricity for many purposes, and any one of those can spell disaster when the utility power is interrupted. A property power generation unit supplies electricity that is not really only a convenience, but has become a necessity.

Medical Equipment – Here

People who trust medical equipment are able to live at home and not in institutions because of the widespread accessibility to reliable electricity. Once the method of getting electricity is interrupted, the medical equipment fails. Home generators for backup power can supply the necessary electricity and make the apparatus operating. Generators can supply power for abbreviated periods until help arrives, or as long as the outage lasts. Home medical equipment that can run on standby generator or portable generator power includes oxygen generators, monitors, CPAP machines, and residential dialysis equipment, as well as other types of equipment.

Home Appliances

Throughout a power outage, home generators supply power for sump pumps to prevent flooding, well pumps to offer water for drinking and sanitation, and refrigerators and freezers to help keep food from spoiling.
Early 20th century homes had outdoor plumbing, passive heating systems, and windows for temperature control. Today, HVAC systems provide climate control to help keep homes warm or cool and provide adequate ventilation and the plumbing from freezing or mold from growing when the humidity is simply too high.
As reliance upon electricity is continuing to grow, our capacity to do without some has decreased proportionally. Home power generation units add the space left when power companies neglect to deliver electricity to homes that require it.

To find out more, go to: www.BackupHomePower.com

Generac Generators Updates the 20kw Standby Generator

Generac Generators Updates the 20kw Standby Generator to New Model – 6244

Generac Power Systems introduced the updated model 6244, 20kW Guardian Standby Generator using the new Evolution Controller. The favorite package previously sold under model #5875 which included the 200 Amp, Service-Entrance-Rated Smart Switch, an automatic transfer switch. The new type of the Guardian Series backup generators has been available since January in the 2013 International Builder’s Show in Vegas, Nevada.

Generac’s Guardian Series Home Standby Generators work with an automatic transfer switch the signal from supply chance to a house throughout a power outage without homeowner intervention and run on either propane (LP gas) or Gas Main, eliminating the necessity for frequent refueling.

Evolution Controller

The Evolution replaces the Nexus Controller and includes many updated features. The new interface is often a back-lit membrane keypad to demonstrate generator status instantly. Other new features go beyond the cosmetic. The live view screen still shows two lines of text and reports maintenance logs, generator status alerts, and alarms, but new functional features help house owners with better specifics of battery health, as well as alarms for that wall charger, overload, and fuse warnings to distinguish challenges before they become problems.

The new Evolution also supplies a USB port which allows a technician to update the firmware without removing the controller―a far better solution than swapping out your old Nexus controller for just one with updated programming.

Engine Upgrades

The Guardian group of generators uses Generac’s engineered overhead valve industrial engine―the only engine in the industry that was specifically made for use in standby generators. Generac has produced the engines in their standby units better to service and contains improved starting at a wide range of temperatures using the new updated model line. A redesigned fuel system eliminates the choke and contains a standard throttle body.

Guardian generators ship from the factory able to run using gas main. Conversion to LP gas has long been simple and easy and took just moments, but the new design allows conversion without tools and just has a few seconds. It is actually turning a knob.

Entire Home Power

With 20,000 watts of power, the 6244 can run many kitchen appliances including air conditioning. The Smart Switch contains a load-shedding controller which allows high-voltage appliances to operate without overloading the generator. The Smart Switch senses an overload condition and turns off high-voltage loads in order of assigned priority.

Without the additional hardware, the Smart Switch can control two air conditioning. Digging in an electric Management Module core kit allows the addition of another high-voltage device. Fully packed with four Power Management Modules (PMMs) allows the smart switch to manage when using two air conditioning and 4 additional high-voltage, high-current appliances.

Neighborhood Friendly Design

The 20kW 6244 will fit easily into any suburban neighborhood. The all-metal enclosure is powder coat painted to have an attractive appearance made from Galvaaneal steel for a long, corrosion free-life. Just 66db, it’s quieter than many central air conditioning unit units―important to keep the neighbors happy when their power is going along with their windows are open up. Placement is made easy by compliance with National Fire Protection Association codes and regulations for placement at 18 inches from the home.

Generac leads the industry with standby generators for backup home power, and now the Guardian lineup receives a well earned update.

For more info go to: www.NPSGenerac.com

Need More than a 20kw Generator can Provide

Need More than a 20kw Generator offers? A glance at Larger Units and Who Needs Them

Air-cooled standby generators top out at 20 kilowatts, that is a nothing more than 83 amperes at 240 volts. Most new homes have 200-amp service. In general, most homes avoid using how much power their service is capable of supplying, and seldom come close―most of the time. In fact, most homes don’t exceed 80 amperes apart from short periods or when large motors on air conditioners or well pumps start. From the 1940s to the 1970s, 60-ampere service was usual and 100-ampere service became common within the 1970s.

With power management features available for most residential standby generators, as well as conservative power use practices, most homes can perform comfortably on 20 kilowatts or a smaller amount of standby power.

Higher Power Requirements

Larger homes have higher power requirements. It’s not at all uncommon to need 300- and 400-amp service in large homes, along with the largest luxury homes are often given even larger electrical service. They have got multiple, high-capacity air conditioners and furnaces, and in general, larger appliances.  Power use exceeding 20 kilowatts will be the normal, everyday degree of used in these homes.

Small enterprises and manufacturing facilities are also higher users of electricity. When it comes to larger facilities, multiple standby generators can be used to produce enough standby electricity just to supply emergency systems that don’t include everyday operational requirements.

Liquid Cooled Generators

Liquid-cooled standby generators use engines comparable to those seen in cars. There is a fan-cooled radiator filled up with coolant which is pumped from the engine to cool it. As they do not count on the ambient air temperature to directly cool the engine, and also, since their air conditioning is active instead of passive, they have got less issue with overheating and give more reliable operation.

Standby generators of this type can be obtained with as much as 60 kilowatts of power for residential use, and bigger models up to 150 kilowatts for commercial use. A capacity of 60kW provides up to 250 amperes of current continuously, enough to keep most luxury homes operating without the need for judicious utilization of power.

The larger, commercial standby models will handle the requirements of most commercial facilities and can supply power to restaurants, offices, apartments, and retail facilities. Facilities which need more power can install multiple units.

Manufacturers

For residential use, Generac Power Systems manufacturers the QuietSource type of home standby generators. The QuietSource models can be purchased in 22, 27, 36 and 48 kilowatts, enough power for many larger and luxury homes. QuietSource generators include models in 240-volt single-phase,  208-volt three-phase, and 480-volt three-phase standby power.

Generac’s Commercial series of liquid-cooled standby generators include 22 to 150 kilowatt models for business or commercial use and come in 240, 208, or 480 volt models in single and three-phase configurations. Models with aluminum or steel enclosures can be obtained.

Briggs & Stratton has three models available for entire house standby power in 35, 45, and 60 kilowatts to power the most important of luxury homes during a power outage. With this sort of power available, there’s no need to forgo any one of life’s necessities or conveniences.

Considerations

Homes that count on high-demand electric appliances such as ranges, dryers, water heaters, well pumps, electric heating, and central air conditioners may need more power than an air-cooled standby generator provides without extensive management and careful using of power. These homeowners must look into a more substantial, liquid cooled generator.

Businesses and commercial operations ought to have the reliability and power advantages that larger, liquid-cooled standby generators can offer.

For more information on these great brands, please go to: www.NPSGenerac.com

20kW Standby Generator Comparison

20kw Standby Generator Comparison

Standby generators supply backup power during an outage, whether for a couple hours or maybe a few weeks after a major storm like Hurricane Sandy. Manufacturers including 20kW standby generators by the volume of continuous power they are able to provide, and not all generator ratings are equal. Briggs & Stratton, Generac, and Cummins Onan all offer standby generators that run on either LP or gas, only provide a full 20kW of power while running on LP. The generators are derated while operating on gas and can only provide up 18kW of continuous power.

Kohler generators are designed to run on either LP or NG, and so they supply the rated power for that generator. A 20kW NG standby unit will provide 20,000 watts of power, the same as the similar model that runs using LP gas.

Reserve power isn’t advertised by standby generator manufacturers, but generators provides a supplementary boost of power for a couple seconds to start large, robust motors.

Remote Options

Generac uses cellular phone texting system using Mobile Link offering to deliver status and maintenance updates for 20kW generator on any text-message-capable cell phone. Mobile Link offers web access through the computer, tablet, or mobile phone that also includes programming exercise periods or scheduling maintenance.

Cummins Onan can email updates, send maintenance requests to technicians, and permit viewing generator status from the net.

Kohler Power Systems has got the On Cue Home Generator Power Management System, which allows homeowners to watch real-time 20kW standby generator status, view and reset diagnostic codes, check status messages, and consider multiple generators on a single screen.

Warranty

All the 20kW generator manufacturers offer warranties applicable to standby power applications when a utility supply is connected. Off-grid systems not connected to the utility supply are not covered by the standard consumer warranties.

Kohler’s consumer warranty is a few years or 2000 hours. Using off-grid applications being a standby unit, they offer an 18 month/1000 hour warranty. Labor is just covered throughout the first couple of years after installation.

Generac offers a 5 year consumer warranty with complete coverage for that first couple of years, coverage only on parts in year three, and limited coverage about the alternator and engine in years 4 and 5.

Briggs & Stratton supplies a 4 year, 1600 hour limited warranty on parts and labor.
Cummins Power Systems comes with a limited consumer warranty for 5yrs or 2000 hours. Off grid applications have warranty coverage for 12 months or 1000 hours. Travel and labor are covered for that first couple of years.

For more information go to: www.NPSGenerac.com

Emergency Generators – A Must for All Residential Homeowners

Emergency Generators: Essential for All Residential Homeowners

The time when electricity in a home was obviously a luxury convenience is no longer carried out. Since the end of the 1940s, nearly every existing home in the US has been furnished with electrical power, and many jurisdictions require complete installation in new homes. Modern homes depend upon electricity for hvac, preventing ground water flooding, home alarm systems and refrigeration. Homes in rural areas also have electricity to pump water for consumption, hygiene, and sanitation.

When electrical power is lost, these essential systems will not function. Basements and crawl spaces can flood from ground-water seepage, refrigerators and freezers slowly warm and food spoils. In subfreezing temperatures, the plumbing could eventually freeze leading to broken pipes and the possibility of flooding. During extended outages, batteries in home alarm systems will fail. Individuals who depend upon medical equipment may be at increased risk whenever they do without their life support systems.

Making do without electricity can often be more than simply an inconvenience, it places the property in danger and will threaten the lives of those that depend upon the security their house provides.

Emergency Generator Protection

It is unnecessary to call a place home without electrical power after an urgent situation generator is installed.

When utility power fails, an urgent situation supply of power is able to keep essential circuits operating. The greater the generator, the harder it is able to power. Smaller standby and portable units of 5000 to 7000 kilowatts are able to keep the refrigerator and freezer cold, power a few lights, along with the sump pump and maybe the furnace when it is needed.

Larger units as much as 14 kilowatts with power management strategies will handle more appliances including well pumps, water heaters, and air conditioning, in addition to more convenience lighting and small appliances or computers.

Air cooled standby units up to 20,000 watts are for sale for larger homes or more appliances. Liquid cooled units of up 60 kilowatts will give even the most power hungry of homes with sufficient capability to keep everything running from pool pumps to jacuzzis.

Standby Emergency Generators

Portable generators can supply backup power, but they won’t do it automatically. When it comes to emergency power for critical home systems, the standby generator fills in when the utility company struggles to deliver power.

Standby emergency generators are permanently installed appliances that work with an automatic transfer switch. The switch selects utility power during normal operation and standby generator power throughout an outage. It reconnects the utility when services are restored. Both air-cooled and liquid-cooled models are for sale for residential homes, and operate on natural gas or on LP gas (propane). They may be reliable and commence automatically after a power outage without operator intervention to shield the property and family even if the homeowner is away on holiday or at the office a fairly short distance away.

Portable Generators For Emergencies

Portable generators also supply power during emergencies, but require a homeowner to hook them up, start them, and manually switch your home to generator power utilizing a manual transfer switch. Additionally they have to have a steady diet of fuel. A normal installation includes the manually operated transfer switch that connects to a inlet box and to the key service panel. The switch supplies power from the main panel or from the generator into a select group of essential circuits. A heavy-duty cord connects the generator to the inlet box.

A less sophisticated method connects appliances to the generator with extension cords. This works well with many householders, but operating hard-wired appliances including the furnace is usually unattainable.

Emergency generators supply all-important power during emergencies and each home needs to be furnished with an urgent situation power source.

To find out more info, head to: www.Got-Generators.com

Westinghouse Generators and Pressure Washers

Westinghouse Generators & Some of the Lineup of Generators and Power Washers

In 1886, George Westinghouse founded Westinghouse Electric Company and built the first AC power generating plant in Great Barrington, Massachusetts. Their founder already had knowledge of a different type of power: he patented the rotary steam engine in 1865. Since that time, the Westinghouse company has built numerous products from jet engines to light bulbs. Two current products that speak of their roots are the generator and the pressure washer.

Portable Generators

Westinghouse manufactures portable generators rated from 3250 watts through 7000 watts, providing reliable power while at work or in your own home, for everyday use or supply power outage. All of the units run using regular, unleaded gasoline. The engines are protected with automatic shutdown for low oil conditions. All of the portable generators include Westinghouse’s unique VR voltage regulation system for clean, quality power well suited for most electronics.
All of the portable generators include a cpanel which includes four, 20-ampere 120-volt outlets along with a single 30 ampere 120/240-volt twist-lock outlet. Some designs have an included cord allowing you to connect the 120/240-volt outlet with an inlet box or power distribution panel. All outlets are protected by circuit breakers and neutral to ground bonding. An external link to earth ground is required.
Other functions include quiet operation with the Westinghouse Pulse-Flo Muffler system for one of the lowest noise levels in its class. Each unit ships with oil, funnel, along with a tool kit for quick assembly and startup right out of the box. Units furnished with electric start will include a starter battery.
The generators run for 11 to 14 hours at half load, with regards to the height and width of the generator. Fuel consumption by portable electric generators varies with the electrical load and how big the engine.

  • WH3250 – 3250 continuous watts – 3750 surge watts – 14 hour 1/2 load run time – Manual start.
  • WH5500 – 5500 continuous watts – 6750 surge watts – 14 hour 1/2 load run time – Manual start.
  • WH6000S – 6000 continuous watts – 7500 surge watts – 13 hour 1/2 load run time – Electric start – Includes 30-Ampere Power Cord.
  • WH6500E – 6500 continuous watts – 8000 surge watts – 13 hour 1/2 load run time – Electric start.
  • WH7000E – 7000 continuous watts – 8500 surge watts – 11 hour 1/2 load run time – Electric start. WH7000EC is CARB certified for California sale.
  • WH7500E – 7500 continuous watts – 9000 surge watts – 11 hour 1/2 load run time – Electric start.

Power Washers

Westinghouse builds six gasoline-engine-powered power washers with ratings from 2300 to 3000 PSI. All purchases you can use use right out of the box, and includes a top-pressure hose and wand, quick-connect nozzles, engine oil, and detergent/chemical siphon hose. Four standard nozzles include soap dispensing, zero, 25, and 45 degree for various cleaning purposes. All of the models are installed on carts for simple positioning.
The WP 2300 and WP 2500 will include a lightweight gun and wand. Other designs have a stainless steel wand with ergonomic gun.
Westinghouse warrants their power washers for three years.
WP2300 – 2300 PSI – 2.3 Gallons Per Minute (GPM) – 5290 Cleaning Units (CU). EPA and CARB certified emissions to be found in all 50 states.
WP2500 – 2500 PSI – 2.3 GPM – 5750 CU – EPA and CARB certified to be found in all 50 states.
WP2700 – 2700 PSI – 2.2 GPM – 5940 CU – EPA certified to be found in 49 states.  Includes 15 degree nozzle and 30-foot hose.
WP2800 – 2800 PSI – 2.4 GPM – 6720 CU – EPA and CARB certified to be found in all 50 states. Includes 15 degree nozzle and 30-foot hose.
WP3000 – 3000 PSI – 2.4 GPM – 7200 CU – EPA and CARB certified to be found in all 50 states. Includes 15 degree nozzle and 30-foot hose.
WP3000 – 3000 PSI – 2.8 GPM – 8400 CU – EPA and CARB certified to be found in all 50 states. Includes 15 degree nozzle and 30-foot hose.

For more info go to: www.GeneratorPowerforLess.com